Deciding between in-house vs outsourced IT should be based on the type and amount of coverage you need and the risks you can accept, not solely by quantitative factors such as headcount. For organizations in the 20 to 150 employee range, the best choice is usually some combination of both the in-house and outsourced models.
This guide outlines the costs, limitations, and benefits of hiring in-house IT versus partnering with a third-party IT managed services provider (MSP). You will find a practical framework to evaluate your organization’s current gaps and determine which approach will best secure your infrastructure and support your daily operations.
The need to choose between IT support models typically follows a sudden catalyst, such as rapid growth, the loss of an IT manager, or the need to meet new compliance requirements. If you are trying to balance your organization’s escalating technical demands with payroll realities, you are in the right place.
What each model actually covers
If you’re trying to decide between in-house vs outsourced IT, it helps to understand what you are actually paying for. The following table compares the typical capabilities and limitations of an internal IT hire with what a managed services agreement typically covers.
| Comparison category | Internal IT hire | IT managed services agreement |
|---|---|---|
| Day-to-day support | Handles tickets directly, usually in person | Service desk, typically tiered by issue complexity |
| Hours covered | Their working hours, minus leave and sick days | Contracted hours up to 24/7, with after-hours terms stated in the agreement |
| User administration | Accounts, permissions, onboarding, offboarding | Accounts, permissions, onboarding, offboarding |
| Monitoring and patching | Manual or tool-assisted, depends on what they’re given | Automated monitoring and scheduled patching, usually included |
| Security tooling | Only what you buy separately for them to run | Endpoint protection, email filtering, MFA enforcement, usually bundled |
| Backup and recovery | They manage it; testing depends on their workload | Managed and tested on a defined schedule |
| Escalation beyond their depth | Outside vendors, hired ad hoc | In-house specialists on the provider’s bench |
| Line-of-business applications | Learns your specific applications deeply over time | Varies by provider, often limited to vendor liaison |
| Hardware procurement | Researches and purchases, usually at retail pricing | Often handled, sometimes at partner pricing, sometimes billed separately |
| Strategic planning | Depends entirely on the individual’s skill level | Usually a scheduled review, varies by plan tier |
| Projects and migrations | Absorbed into their workload, which pauses other work | Commonly outside the monthly fee, scoped and quoted separately |
What an in-house IT hire actually costs
The US Bureau of Labor Statistics (BLS) puts the 2026 median salary for a US systems administrator or IT manager at $99,000, however, this base number obscures the true cost of hiring an IT professional. To calculate the actual amount, you need to account for mandatory additional employee compensation, recruiting, and the required software stack to support their role.
Employee compensation beyond base salary
A September, 2026 BLS report found that base salaries in IT account for only 42 to 68% of total employer costs. Remaining costs include payroll taxes, insurance contributions, retirement matches, accrual of PTO (paid time off), and other legally required benefits. And, base salaries are actually a lower percentage of total compensation for smaller organizations with 1-99 employees (42%), compared to those with 500 workers or more (68%). Smaller organizations therefore need to adjust their cost projections higher than large firms.
Also essential is accounting for upfront recruitment costs, in addition to ongoing expenses for training and certifications to keep their skills current. And crucially, an IT professional cannot secure their organization’s network empty-handed; employers need to purchase and maintain their tooling, which includes RMM (remote monitoring and management), remote access software, documentation platforms, backup systems, security tooling, and administrative licensing.
Combining all these factors, a $99,000 base salary can translate to a true annual cost of $130,000 to $150,000. Furthermore, when that single role turns over, there will be significant replacement costs and temporary vulnerability.
The table below lets you rebuild this calculation with your own figures.
| Cost component | Basis | Annual |
|---|---|---|
| Base salary | US median, network and computer systems administrators | $99,130 |
| Payroll taxes, insurance, retirement, paid leave | Benefits add roughly 46 cents per dollar of wages for full-time private-industry workers | ~$45,600 |
| Employment cost before tooling | ~$144,700 | |
| Recruitment to fill the role | Agency fee or internal hiring cost | $2,000-$10,000 |
| Training and certification | Annual, to keep skills current | $1,000 |
| Tooling stack | Per endpoint, per month | $10-$20 |
| Total | $144,700 plus tooling |
How outsourced IT is priced
While hiring an in-house professional represents a fixed annual payroll expense, outsourcing your technology converts that overhead into a variable, per-seat operating cost. Understanding exactly how managed IT services pricing is structured (and what might trigger extra charges) is essential for making an accurate financial comparison.
Most IT providers base their fees on either a per-device or per-user model. Per-device pricing is often practical for environments with shared workstations, like a manufacturing floor or a retail counter. Conversely, calculating the IT support cost per user is generally preferred by modern office environments. This model covers an individual employee across their primary desktop, laptop, and mobile without requiring a new line item for every connected device.
Regardless of the pricing model, several core factors drive the final monthly fee. The total endpoint count sets the baseline, but the rate scales depending on your required coverage hours (such as standard business hours versus 24/7 availability). Additionally, deploying advanced security tooling tiers or meeting strict compliance requirements can increase the baseline cost due to the specialized auditing and active monitoring involved.
To avoid billing surprises when calculating outsourced IT support costs, it is critical to know what typically sits outside that predictable monthly fee. Day-to-day helpdesk support and proactive maintenance are typically standard MSP inclusions. However, physical hardware purchases, cloud migrations, large-scale network projects, and after-hours support outside your contracted terms may be billed separately.
Finally, consider the contract length: Most standard partnerships run for one to three years, though monthly contracts exist. Carefully review the service level agreement (SLA) before signing. A well-defined SLA will have clear KPIs, such as guaranteed response times for critical network outages versus routine administrative requests, providing an objective measure of accountability for the life of the contract.
What outsourced IT costs per user
2026 industry averages for outsourced IT place standard user support (helpdesk and proactive network maintenance) between $100 and $150 per user per month. For organizations in highly regulated industries or those requiring an advanced cybersecurity stack (such as 24/7 endpoint detection and response), rates typically range from $150 to $300 per user per month.
For project support, most MSPs structure major initiatives such as server migrations or large-scale network redesigns outside the monthly per-user fee, billing them either as flat-rate projects or at hourly rates averaging $150 to $250 per hour.
IT support cost comparison
Here is a table comparing the outsourced IT model with the BLS data for in-house hiring costs covered in the previous section. It uses the latest 2025/2026 data for in-house roles and 2026 industry averages for MSP pricing.
| IT support model | 2026 estimated pricing | Cost structure |
|---|---|---|
| In-House IT Professional | $130,000 to $150,000 / year | Fixed overhead ($99,130 median base + 30–50% benefits and taxes) |
| Basic MSP (Helpdesk + proactive maintenance) | $100 – $150 / user / month | Predictable monthly operating expense |
| Advanced MSP (Cybersecurity and compliance) | $150 – $300 / user / month | Predictable monthly operating expense |
| Major Project Support (Migrations, Deployments) | $150 – $250 / hour | Variable expense (billed as needed or flat project fee) |
The coverage gap one IT person cannot cover
When considering hiring an internal IT person, the phrase “single point of failure” is often discussed as a risk factor. It is easy to understand as a simple equation. How much IT support coverage will you actually get for that annual salary? For almost all organizations, it will not be enough. Let’s break it down.
A 40-hour work week provides 2,080 hours per year. However, once you deduct paid time off, public holidays, average sick days, and a week for professional training, you are left with roughly 1,800 hours of actual availability. If your organization operates standard business hours, or worse, if departments regularly work evenings and weekends to meet deadlines, your operational baseline easily demands well over 2,500 hours of coverage. Even under perfect conditions, relying on a single employee guarantees a gap of hundreds of hours where your infrastructure is unmonitored and staff are unsupported.
This coverage gap widens significantly during a resignation. A standard two-week notice period is rarely sufficient to recruit, hire, and fully onboard a qualified IT replacement. More importantly, any undocumented knowledge about your IT systems typically leaves with the departing employee.
When the inevitable vacation, illness, or resignation occurs, other employees are often called upon to cover for the missing IT specialist. While this can work in the short term barring any major crisis, the true cost of this workaround is the strategic or operational tasks they are neglecting while they troubleshoot IT issues.
What each IT support model does better
In deciding between hiring internally and outsourcing, it is critical to recognize that neither approach is flawless. Each IT support model brings distinct strengths to your organization.
Where an internal IT hire wins
The most obvious advantage of an in-house IT professional is physical presence. They are available for spontaneous requests, and they understand the priorities and culture of your daily operations.
Additionally an internal hire can develop mastery over your specific line-of-business (LOB) applications. Whether you rely on a niche ERP system for manufacturing, customized management software, or proprietary accounting platforms, an internal hire works with that software and your configurations every day. They learn its quirks, build custom workflows, and can train your staff on its nuances. This lets the employer retain a sense of control over priorities, rather than a provider interpreting them. An external provider manages dozens of different environments and will rarely develop that deep, granular expertise in your specialized LOB software. For organizations with highly non-standard environments, an internal hire offers direct accountability.
Where an outsourced IT provider wins
Conversely, an outsourced provider wins on architectural breadth and structural resilience. Modern business technology requires expertise across network engineering, cloud architecture, advanced cybersecurity, and regulatory compliance—a spectrum of disciplines that is impossible for one individual to master.
An MSP provides a fractional team of specialists to cover these distinct domains. They can also deliver business continuity that is independent of any single person. Through rigorous documentation, if your primary engineer is unavailable, another can seamlessly step in, including coverage outside standard business hours. Finally, MSPs deliver economies of scale to security tooling. They utilize enterprise-grade endpoint detection, proactive monitoring, and compliance auditing systems that would be cost-prohibitive for a small or mid-sized business to purchase on a single-license basis.
The third option most comparisons skip: co-managed IT
When comparing in-house with outsourced IT, many people assume the choice is only between the two. However, a hybrid IT support model offers a highly practical middle ground.
In a co-managed setup, an in-house IT professional (or a small internal team) retains ownership of user relationships, line-of-business applications, and daily operational priorities. Meanwhile, an external provider acts as the backend infrastructure team, carrying the heavy lifting of 24/7 monitoring, advanced security tooling, after-hours support, automated patching, and deep escalation resources for complex outages.
This arrangement typically suits three types of organizations: those with chronically overloaded internal IT who struggle to take time off; those where the internal IT person or team lacks advanced cybersecurity expertise; and those facing compliance obligations that exceed their in-house capabilities. These organizations can leverage co-managed IT support to fill operational gaps without replacing their existing staff.
However, co-managed IT can fail if responsibilities are undefined. Lack of clear ownership inevitably produces both service gaps and duplications, such as licensing security software twice, or both parties assuming the other is verifying the backups. A working arrangement relies on strictly documented responsibilities, a single escalation path for ticket routing, and clearly agreed-upon tooling ownership.
Here is the typical division of responsibilities in a co-managed IT model:
| Responsibility | Internal | Provider |
|---|---|---|
| Day-to-day user support | ||
| Line-of-business application ownership | ||
| Vendor relationships for core business systems | ||
| Setting IT priorities against business needs | ||
| Hardware standards and purchasing | ||
| Onboarding and offboarding | ||
| 24/7 monitoring and alerting | ||
| Patch management and update scheduling | ||
| Security tooling and administration | ||
| Backup management and recovery testing | ||
| After-hours and holiday coverage | ||
| Escalation beyond internal capability | ||
| Compliance evidence and documentation | ||
| Incident response | ||
| Technology planning and budgeting |
When compliance and insurance make the decision for you
For some organizations, the choice between internal or outsourced IT is not based on headcount or budget, but by risk management. Insurers today are demanding that organizations invest in cyber preparedness to secure a policy. Cyber insurance routinely requires proof of security controls, including multi-factor authentication (MFA), active endpoint detection and response (EDR), routine backup testing, and centralized logging. Your ability to demonstrate these controls directly dictates your premiums, or whether you can secure coverage at all.
Beyond insurance, small and mid-sized businesses face increasing pressure from enterprise clients who now push security questionnaires and requirements down to their suppliers. Furthermore, regulatory frameworks like HIPAA, SOC 2, and CMMC (for the defense supply chain) no longer accept “best-effort” IT administration. They require strict, auditable processes and immutable evidence of continuous compliance.
Meeting these obligations is entirely about demonstrable process and evidence generation. Building and maintaining this level of rigorous documentation can be overwhelming for a single internal IT generalist fielding daily support tickets. Conversely, a managed provider relies on standardized, documented procedures by default. For organizations facing intense regulatory or supply chain scrutiny, the need for auditable cybersecurity services often makes the decision for them, independently of how many users they have.
How to decide between in-house vs outsourced IT
The right choice for your organization depends entirely on your environment’s complexity, your daily operational rhythm, and your risk tolerance. Rather than relying on generic advice, apply these definitive criteria to your current situation to see where you fit.
Hire internal IT if:
- You run custom or heavily modified line-of-business applications that demand dedicated daily ownership and ongoing staff workflow training.
- Your operations require a continuous physical presence, such as a busy manufacturing floor, testing lab, or live production environment.
- Your daily IT workload is continuous and heavy, rather than episodic.
- You have the budget to fully fund both a competitive salary and the enterprise-grade security tooling that an IT professional needs to succeed.
- You can accept the unavoidable coverage limits of relying on one person, including sick days, vacations, and the eventual risks of turnover outlined earlier.
Outsource your IT if:
- Your technology environment is largely standardized, relying heavily on platforms like Microsoft 365, established cloud applications, and standard endpoints.
- Your IT needs are episodic, characterized by quiet periods punctuated by occasional, unpredictable spikes in support tickets.
- Your business demands reliable network monitoring and support coverage outside of standard working hours.
- You face stringent regulatory compliance or advanced security obligations that exceed the technical capacity of a single generalist.
- Achieving a predictable, scalable per-seat cost matters more to your financial strategy than maintaining direct control over an employee. In these scenarios, utilizing outsourced IT services offers the highest structural stability.
Go with co-managed IT if:
- You already employ an internal IT professional who is either chronically overloaded by routine tickets or whose expertise is limited.
- You need to retain localized internal ownership of your core applications while adding robust security, monitoring, and after-hours depth.
- You are growing fast enough that the right support model this year will likely be the wrong choice next year. Leveraging co-managed IT services provides the flexibility to bridge that gap without constantly adjusting headcount.
Questions worth asking before you commit to either model
Before extending a job offer to an in-house IT professional or signing a managed services contract, use these targeted questions to evaluate your readiness.
If you are hiring an internal IT professional, ask:
- Who will handle critical network issues when they are on vacation or out sick?
- What is our escalation plan if we suffer a cyber incident or outage that exceeds their technical depth?
- What is our separate budget for the enterprise monitoring and security tooling they need to succeed?
- How will management ensure our new IT person continuously documents our network, so critical knowledge doesn’t live solely in their head?
If you are evaluating an outsourced provider, ask:
- What do the SLAs actually guarantee regarding both response and resolution times?
- Who answers an emergency call after hours, and where are those technicians geographically located?
- What is the process for documenting our environment during onboarding?
- Which specific projects, migrations, or support requests sit outside the monthly fee?
- If the partnership ends, what is the defined exit process and timeline for securely handing back our administrative credentials and data?
Common questions about comparing in-house IT to outsourcing
How many employees do we need before hiring internal IT?
Industry benchmarks suggest the tipping point is usually around 50 employees. Below that, an organization rarely generates enough continuous technical work to keep a full-time IT professional busy without assigning them non-IT tasks. Beyond 50 employees, organizations often reach the scale required to justify their first dedicated internal hire.
Is outsourced IT cheaper than hiring internally?
For organizations with fewer than 50 employees, the outsourced model almost always wins on pure cost. However, as your headcount approaches 75 to 100 employees, the financial math begins to shift. Because managed IT prices scale linearly per user, an internal team (or a hybrid co-managed approach) eventually becomes more cost-effective at the enterprise level.
Can we use an MSP if we already have internal IT?
Yes. As detailed in the co-managed IT section above, combining an internal employee with an MSP is the standard playbook for mid-sized companies needing to add expertise and/or capacity without increasing their payroll.
What happens if we want to bring IT back in-house?
A reputable MSP will not hold your infrastructure hostage. If you outgrow the outsourced model, the transition involves a standard 30- to 90-day offboarding phase. The provider hands over all global administrative credentials, up-to-date network documentation, and software licensing directly to your new internal team to ensure a seamless operational handoff.
Choosing the best IT support model for your security and ROI
The choice between in-house and outsourced IT is all about aligning your IT support with your environment’s complexity and risk tolerance.
Before posting a job listing for an internal hire or contacting an MSP to outsource your IT support, look at your current situation. Determine the exact number of your active endpoints and calculate the hours of coverage your organization needs to function safely. Once you have those numbers, you can begin the conversation about cost and scalability that will steer you toward one of the support models. If you need a second opinion on which model best fits your current situation, the team at Fidelis is always here to answer your questions.



